离子色谱法测定不同地区家庭饮用井水中的阴、阳离子

采用离子色谱法测定不同地区家庭饮用井水中氟离子、氯离子、硝酸根、硫酸根、钠离子、钾离子、镁离子和钙离子等8种阴、阳离子的含量。样品经IonPac AS11-HC型分离柱及IonPac AG11-HC型保护柱分离,以30mmol·L-1氢氧化钾溶液为淋洗液(阴离子分析);样品经IonPac CS12A型分离柱及IonPac CG12A型保护柱分离,以20 mmol·L-1甲基磺酸溶液为淋洗液(阳离子分析);采用电导检测器检测。8种离子在一定的质量浓度范围内与其峰面积呈线性关系,方法的检出限(3s)在0.002~0.034mg·L-1之间。对井水样品进行测定,测定值的相对标准偏差(n=6)在0.59%~2.0%之间。用标准加入法做方法的回收试验,计算得回收率在98.3%~109%之间。     

固相萃取富集-高效液相色谱-串联质谱法测定饮用水源水体中8种抗生素的残留量

提出了固相萃取富集-高效液相色谱-串联质谱法测定饮用水源水体中8种抗生素残留量的方法。样品按规定方法进行预处理并调节其酸度至pH 2.5或pH 3.2。将此溶液经过Oasis HLB SPE小柱进行富集并净化。用XBridge C18色谱柱为分离柱,以不同体积比的(A)10mmol·L-1甲酸溶液和(B)10mmol·L-1甲酸-甲醇溶液组成的混合液作流动相进行梯度淋洗。串联质谱分析中采用电喷雾正、负离子源及多反应监测模式。8种抗生素的质量浓度均在1.00~400μg·L-1范围内与其峰面积呈线性关系,方法的检出限(3S/N)在0.4~0.7ng·L-1之间。加标回收率在81.9%~110%之间,测定值的相对标准偏差(n=7)在0.7%~4.5%之间。     

免疫磁珠捕获富集结合HPLC-Q-TOF/MS技术分析复杂水样中的蓖麻毒素

以自来水、海水以及国际禁化武组织(OPCW)官方水平考试水样为背景基质,在优化仪器参数的基础上,建立了3种水样基质中蓖麻毒素的高效液相色谱-四极杆/飞行时间质谱(HPLC-Q-TOF/MS)分析方法。蓖麻毒素在3种基质中的检出限分别为0.05,0.20,1.00μg/m L,HPLC-Q-TOF/MS测得蓖麻毒素的分子量为62 884.97 Da。为提高复杂水样的分析灵敏度,采用连接有蓖麻毒素单克隆抗体6A6的免疫磁珠对不同水样中的蓖麻毒素进行富集与纯化,利用酶联免疫吸附(ELISA)法绘制了免疫磁珠捕获方法的工作曲线,在5.00~100μg/m L线性范围内,不同浓度加标样品的回收率为82.1%~88.8%,相对标准偏差为4.2%~5.9%。将免疫捕获技术与HPLC-Q-TOF/MS分析方法相结合,对真实蓖麻毒素加标样品进行分析,3种基质中蓖麻毒素的检出限分别达2.5,10,50 ng/m L。本方法可用于水样中痕量蓖麻毒素的快速、有效检测。     

离子液体超声辅助萃取/LC-MS法测定环境水中痕量五氯酚

建立了离子液体超声辅助萃取/液相色谱-质谱联用测定环境水中痕量五氯酚(PCP)的方法。采用离子液体1-丁基-3-甲基咪唑六氟磷酸盐[C4mim][PF6]为萃取剂,考察了试样体积、p H值、温度、超声萃取时间和无机盐含量等因素对PCP萃取效率的影响,试样在XDB C18(150 mm×2.1 mm,5μm)色谱柱上,以甲醇-2 mmol/L醋酸铵溶液(70∶30)为流动相,电喷雾(ESI)电离负离子选择离子监测模式(SIM)进行测定。在优化的萃取条件下,PCP在0.005~1.0μg·L-1范围内具有良好线性,相关系数(r)为0.999 2,回收率为91.0%~97.0%,日内相对标准偏差(RSD)为1.1%~5.4%,日间RSD为3.8%~8.3%,定量下限为0.005μg·L-1。建立的方法简便、干扰少、特异性强,可用于环境水样中痕量PCP的测定。     

石墨烯/聚二甲基硅氧烷涂层顶空固相微萃取与气相色谱联用测定环境水和果汁中菊酯农药残留

建立了石墨烯/聚二甲基硅氧烷涂层顶空固相微萃取与气相色谱在线联用测定环境水和果汁样品中6种菊酯类农药的检测方法。该涂层的萃取性能优于商用聚二甲基硅氧烷(PDMS,Polydimethylsilane)及聚丙烯(PA,Polypropylene)涂层。对影响萃取性能的因素(如萃取温度、离子强度、萃取时间及解吸时间)依次进行了优化。在最优条件下,丙烯菊酯与联苯菊酯的线性范围为0.02~5μg/L,甲氰菊酯、氯氰菊酯、氰戊菊酯的线性范围为0.1~20μg/L,溴氰菊酯的线性范围为0.2~20μg/L,其相关系数均高于0.99,检出限为6.8~58.2 ng/L,定量下限为18.2~154.9 ng/L。同一涂层的相对标准偏差(RSD,n=5)不高于9.2%,3根涂层之间的RSD为6.7%~10.8%。将该方法用于河水、鱼塘水、苹果汁和橙汁中6种菊酯残留的分析,加标回收率分别为81.6%~92.9%,82.3%~96.1%,78.2%~92.8%和79.9%~91.7%。方法简便、灵敏,能够满足环境水样及浓缩果汁样品中痕量农药残留的分析要求。     

环境水体中酚类EDCs前处理技术及分析方法研究进展

环境内分泌干扰物(EDCs)是指干扰生物体内保持自身平衡和调节发育过程中天然激素的合成、分泌、运输、代谢、结合、反应、消除等生物过程的外源性化学物质,这类物质的存在会干扰人类和野生动物的内分泌系统,带来生殖障碍、发育异常、免疫功能减弱等问题。EDCs,尤其是使用最为广泛的酚类EDCs,在水环境中的污染特征研究已是当前科学界和公众共同关注的热点问题之一。环境样品基质非常复杂,使得痕量酚类EDCs的分析检测难度较大。该文对近年来环境水体中酚类EDCs的分析方法进行了综述,分别对样品前处理与检测分析技术进行了介绍,其中前处理技术包括样品萃取、样品净化和样品衍生化,检测分析技术包括化学分析和仪器分析。最后对酚类分析方法进行了展望。     

超声辅助萃取-分散液液微萃取/气相色谱法测定环境水样中六氯苯、林丹及硫丹

建立了超声辅助萃取(UAE)-分散液液微萃取(DLLME)/气相色谱法测定环境水样中六氯苯、林丹和硫丹,并对影响萃取和富集效率的因素进行了优化。在最优条件下,六氯苯、林丹及α-硫丹的线性范围为1.0~1 000μg/L,检出限分别为0.47、0.39及0.63μg/L;β-硫丹线性范围为5.0~1 000μg/L,检出限为2.44μg/L;相对标准偏差(RSDs)为8.3%~11.7%(n=7)。用该方法对环境水样中的六氯苯、林丹及硫丹进行了分析,自来水、灌溉水、湖水样的平加标回收率分别为94.2%~100.4%、89.4%~99.4%和69.6%~96.3%。     

Well‐Defined Palladium Nanoparticles Supported on Siliceous Mesocellular Foam as Heterogeneous Catalysts for the Oxidation of Water

Herein, we describe the use of Pd nanoparticles immobilized on an amino‐functionalized siliceous mesocellular foam for the catalytic oxidation of H₂O. The Pd nanocatalyst proved to be capable of mediating the four‐electron oxidation of H₂O to O₂, both chemically and photochemically. The Pd nanocatalyst is easy to prepare and shows high chemical stability, low leaching, and recyclability. Together with its promising catalytic activity, these features make the Pd nanocatalyst of potential interest for future sustainable solar‐fuel production.     

Copper as a Robust and Transparent Electrocatalyst for Water Oxidation

Copper metal is in theory a viable oxidative electrocatalyst based on surface oxidation to Cu^III and/or Cu^IV, but its use in water oxidation has been impeded by anodic corrosion. The in situ formation of an efficient interfacial oxygen‐evolving Cu catalyst from Cu^II in concentrated carbonate solutions is presented. The catalyst necessitates use of dissolved Cu^II and accesses the higher oxidation states prior to decompostion to form an active surface film, which is limited by solution conditions. This observation and restriction led to the exploration of ways to use surface‐protected Cu metal as a robust electrocatalyst for water oxidation. Formation of a compact film of CuO on Cu surface prevents anodic corrosion and results in sustained catalytic water oxidation. The Cu/CuO surface stabilization was also applied to Cu nanowire films, which are transparent and flexible electrocatalysts for water oxidation and are an attractive alternative to ITO‐supported catalysts for photoelectrochemical applications.     

Nanometer‐Scale Water‐ and Proton‐Diffusion Heterogeneities across Water Channels in Polymer Electrolyte Membranes

Nafion, the most widely used polymer for electrolyte membranes (PEMs) in fuel cells, consists of a fluorocarbon backbone and acidic groups that, upon hydration, swell to form percolated channels through which water and ions diffuse. Although the effects of the channel structures and the acidic groups on water/ion transport have been studied before, the surface chemistry or the spatially heterogeneous diffusivity across water channels has never been shown to directly influence water/ion transport. By the use of molecular spin probes that are selectively partitioned into heterogeneous regions of the PEM and Overhauser dynamic nuclear polarization relaxometry, this study reveals that both water and proton diffusivity are significantly faster near the fluorocarbon and the acidic groups lining the water channels than within the water channels. The concept that surface chemistry at the (sub)nanometer scale dictates water and proton diffusivity invokes a new design principle for PEMs.